Manufacturer Code Charts: 9: 9.3

- Set multimeter on 200-ohm scale.

- Measure resistance between anti-lock electronic control module harness connector Pin 3 and speed sensor harness connector Pin B.

- Measure resistance between anti-lock electronic control module harness connector Pin 10 and speed sensor harness connector Pin A.

- Is resistance less than 10 ohms?

YES -- Circuit is not open. Go to 9.4. 9.4

NO -- Find and repair open circuit along circuit 519 (LG/BK) and 523 (R/PK). Go to 9.6. 9.6