Cargo Lamp: Service and Repair

Lamp, Hi-Mount Stoplamp (Explorer), Hi-Mount Stoplamp/ Cargo Lamp (Ranger)

1. Remove the two screws from the surface of the pillar/dome lamp lens (13783).

2. After removing the screws, remove rear hi-mount lamp (13A613).

3. Remove the socket by rotating it 45 degrees and pulling it out of the rear hi-mount lamp that contains the burned-out miniature bulb (13466) and replace the miniature bulb.

4. To install, push the bulb socket into the rear hi-mount lamp and rotate 45 degrees.

5. Position the rear hi-mount lamp on vehicle.

6. Secure with two screws.