Center Mounted Brake Lamp: Service and Repair

Rear Hi-Mount Lamp:

1. Remove two screws securing rear hi-mount lamp (13A613) to vehicle.

2. Pull lamp away from vehicle and disconnect wiring connector.

3. Replace miniature bulbs (13466) if required by rotating socket to remove from rear hi-mount lamp and pull miniature bulb from socket.

Installation

1. Press miniature bulb into socket. Place socket into rear hi-mount lamp and rotate to secure in place.

2. Position gasket on rear hi-mount lamp and connect wiring connector.

3. Position rear hi-mount lamp on vehicle and install two screws.