Disassembly and Assembly

Removal and Installation

NOTE: Removal of radiator grille (8200) will make headlamp assembly removal easier.

1. Remove headlamp door (13064) and headlamp bulb and retainer (13N021) as described in this section.






2. Disengage retaining spring from housing.

3. Remove vertical headlamp adjusting screw (13032) by squeezing the tabs with pliers and pulling.

4. Remove horizontal headlamp adjusting screw assembly by squeezing the tabs of the metal clip with a flat-blade screwdriver and pulling.






5. Remove assembly from vehicle.

For installation, follow removal procedures in reverse order. Make sure horizontal headlamp adjusting screw is inserted through slot in sheet metal above lamp. Re-aim headlamp.