Crankshaft Gear/Sprocket

Crankshaft Pulley/Damper/Front Oil Seal

Coat crankshaft damper sealing surface with clean engine oil XO-5W30-QSP (ESE-M2C153-E) or equivalent SAE 5W-30 Service SG.
- Apply RTV using Rotunda RTV Dispenser 071-00001 or equivalent to keyway of damper prior to installation.

CAUTION: Do not drive damper on with a hammer.

- Install damper using Crankshaft Damper Replacer T74P-6316-B.
- Install damper attaching bolt and tighten to 40-50 Nm (30-37 ft-lb), then turn bolt an additional 80-90 degrees tighter.