Power Outside Mirror

REMOVAL and INSTALLATION
1. Remove the front door trim panel. Peel back the water shield if necessary to gain access to the mirror wiring connector.
2. Disconnect the wiring connector. Remove rear view mirror mounting hole cover located above the front door trim panel (inside window sail cover) by using a flat blade screwdriver to carefully pry off.
3. Remove the three nuts retaining the outside rear view mirror to the front door.
4. Pull outside rear view mirror away from the front door while guiding the wiring out of the front door.
5. To install, reverse Removal procedure. Tighten nuts to 6-8 Nm (54-70 lb-in).