Inspection and Verification (Start Testing Here)

1. Verify the customer's concern by operating the headlamps to duplicate the condition.
2. Inspect to determine if one of the following concerns apply:

VISUAL INSPECTION CHART

Electrical
- Circuitry open/shorted.
- Connectors damaged.
- Bulb burned out.
- Damaged headlamp switch.
- Damaged light switch rheostat resistor.
- Blown Fuses K (60A) and 23 (15A).

3. If inspection reveals obvious concerns which can be readily identified, service as required.
4. If the concern(s) remains after the inspection, determine the symptom(s) and go to the following Symptom Chart. Symptom Chart(s)