Description and DTC's

Internal Harness Diagram

Diagnostic Trouble Codes are:
- P0750: SS1 Solenoid Circuit Failure.
- P0755: SS2 Solenoid Circuit Failure.
- P0760: SS3 Solenoid Circuit Failure.
- P0731: 1st Gear Failure.
- P0732: 2nd Gear Failure.
- P0733: 3rd Gear Failure.
- P0734: 4th Gear Failure.
- P0751: SS1 Functional Failure.
- P0761: SS3 Functional Failure.
- P0756: SS2 Functional Failure.
- P1751: SS1 Function Failure.
- P1756: SS2 Function Failure.
- P1761: SS3 Function Failure.

NOTE: This pinpoint test is designed to diagnose the shift solenoid electrical system ONLY. To prevent replacement of good components, note that the following areas may be of concern:
- Engine-performance, cooling, brakes.
- Electrical-battery, input sensors, wiring harnesses.
- Transaxle-internal transaxle components, linkage, cooling.

This pinpoint test is designed to diagnose the following components:
- Transaxle wiring harness, SS1, SS2, VPWR, SS3.
- Powertrain control module.

Refer to the charts when performing the pinpoint test steps.