Torque Specifications

Accelerator Cable Bracket Retaining Bolts 71-106 in lb
Condenser To Radiator Mounting Screws 89-106 in lb
Front Engine Support Insulator Lower Retaining Nut 65-87 ft lb
Front Engine Support Insulator To A/C Comp. Bracket Bolts 30-40 ft lb
Fuel Injection Supply Manifold Bolts 70-106 in lb
Ignition Coil Retaining Bolts 30-41 ft lb
Intake Manifold Bolts [01]
LH Exhaust Manifold Bolts 11-14 ft lb
Pinch Bolt & Nut 25-34 ft lb
Radiator Mounting Bolts 45-61 in lb
Rear Engine/Transaxle Support To Transaxle Bolts 56-75 ft lb
Rear Support Insulator To Engine & Transaxle Support Nut 65-87 ft lb
Rear Support Insulator To Front Sub Frame Through Bolts 56-75 ft lb
RH Exhaust Manifold Bolts 15-22 ft lb
Rocker Arm Seat Retainer Bolt [01]
Sub-Frame To Body Bolts 57-76 ft lb
Torque Converter Nuts 20-34 ft lb
Transaxle To Engine Bolts 30-44 ft lb
Wheel Lug Nuts 83-112 ft lb
Y-Pipe To Exhaust Manifold 25-34 ft lb

[01] -- Install bolts No. 1, 2, 3 and 4 and hand tighten Install remaining bolts and tighten in two-step process. Torque in sequence to 15-22 ft. lbs., then again in sequence to 20-23 ft. lbs. Refer to Intake Manifold for the tightening sequence.