RH

REMOVAL
1. Disconnect battery ground cable.

NOTE: If it is necessary, remove any trim panels to gain access to the harness.

2. Disconnect all wiring harness connectors.
3. Disengage harness from all locators, straps or clips as necessary, including ground wire eyelets. Remove harness from vehicle.

INSTALLATION
1. Position harness in vehicle, making sure that harness is engaged in all locators, straps or clips.
2. Connect all harness connectors to components other harnesses as necessary.
3. Secure ground eyelets to body as necessary.
4. Connect battery ground cable and check all applicable circuits for proper operation.
5. Install any trim removed during harness removal.