Power and Ground Distribution: Specifications

Bolt to Fuse Panel 1.6-2.2 Nm (14-19 Lb-In)
Nut to Wire Trough 1.6-2.2 Nm (14-19 Lb-In)
Nut and Washer to Generator 7-9 Nm (62-80 Lb-In)
Nut and Washer Assembly 1.6-2.2 Nm (14-19 Lb-In)
Screw, EDIS Module 3-5 Nm (27-44 Lb-In)
Screw 1.6-2.2 Nm (14-19 Lb-In)
Screw to Bracket 1.3-1.7 Nm (12-15 Lb-In)
Screw to Instrument Cluster 2-3 Nm (18-27 Lb-In)
Screw to Generic Electronic Module (GEM) 2-3 Nm (18-27 Lb-In)
Screw 1.4-2.0 Nm (12-18 Lb-In)
Bulkhead Connectors Screws 5-7 Nm (44-62 Lb-In)
Power Distribution Box to Fender Screws 5-6 Nm (44-53 Lb-In)
Power Distribution Box Cable Terminal Nuts 9-12 Nm (80-106 Lb-In)
Cable Bracket to Master Cylinder Stud Retaining Nuts 4-6 Nm (35-53 Lb-In)
Engine Control Sensor Wiring Connector Hold Down Screw 4-6 Nm (35-53 Lb-In)
Fan Control Resistor to Body Bolt 8-10 Nm (71-89 Lb-In)
Ground Lead Nut 21-29 Nm (15-21 Lb-Ft)
Ground Lead to Engine Bolt 40-55 Nm (30-40 Lb-Ft)
Ground Strap to Radiator Support Screw 10-14 Nm (89-124 Lb-In)
Ground Lead to Lower Radiator Support Screw 8-10 Nm (71-89 Lb-In)