End Play Check

SPECIAL SERVICE TOOL(S) REQUIRED
End Play Checking Tool: T80L-7902-A
Converter Guide Sleeve: T86P-7902-A

Tool Installation:

1. Position End Play Checking Tool T80L-7902-A and Converter Guide Sleeve T86P-7902-A in torque converter hub.





2. Tighten nut on end play checking tool.

Torque Converter Endplay Test:

3. Mount Dial Indicator with Bracketry TOOL-4201-C or equivalent on end play checking tool.
With stylus contacting converter cover and with indicator at zero, lift on checking tool handles.
If indicator reading is above 1.27 mm (0.050 inch), replace the torque converter.