DT1 Low Speed ABS Stop

DT1 LOW SPEED ABS STOP

NOTE: Wetting down the are where the stop is to be performed will aid this test.

- Drive the vehicle at approximately 16 km/h (10 mph).

- Press on brake pedal hard enough to lock all four wheels.

Does one wheel lock consistently?

> Yes
If the yellow ABS warning indicator is not on, Go to the Symptom Chart condition Wheels Lock Up. Symptom Related Diagnostic Procedures

If the yellow ABS warning indicator comes on and stays on, go to Drive Cycle Test DT7. DT7 Obtain Diagnostic Trouble Code

> No
If the yellow ABS warning indicator is not on and one wheel does not lock up consistently, go to Drive Cycle Test DT2. DT2 Check For Unwarranted ABS Activity