Rear Antilock Brakes (RABS)

R2 CHECK LOW SPEED ABS STOP

NOTE: Wetting down the area where the stop is to be performed will aid in the accomplishment of this test.

- Drive at approximately 16 km/h (10 mph).

- Press on the brake pedal hard enough to lock all four wheels, and observe the rear wheels in mirrors or using an observer.

Do one or both of the wheels lock up consistently? (Momentary lockup is permissible.)

> Yes
Perform Pinpoint Test R3. R3

> No
If other symptoms are detected, Go to the symptom chart. Symptom Related Diagnostic Procedures

If the yellow ABS warning indicator is not on, Perform Pinpoint Test R4. R4

If the yellow ABS warning indicator comes on and stays on, repeat the system pre-check.