Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement

REMOVAL AND INSTALLATION






1. Disconnect the battery ground cable.

NOTE: When battery voltage is removed from the Powertrain Control Module (PCM), all learned values will be cleared and reset to predetermined values. When battery voltage is restored to the PCM, the vehicle may exhibit certain driveability concerns. It will be necessary to drive the vehicle to allow the PCM to relearn values for optimum driveablilty and performance.

2. Remove the parking brake and shift consoles.






3. Place the gearshift lever in LOW and remove the four transmission control selector dial bezel screws.






4. Turn the transmission control selector dial bezel one quarter turn counterclockwise.






5. Loosen the PCM electrical connector bolt and disconnect the PCM electrical connector.






6. Slide the PCM straight out.
7. To install, reverse the removal procedure.






8. Connect the battery ground cable.