Cruise Control Servo: Service and Repair

REMOVAL






1. Remove the accelerator control splash shield.
1. Remove the three screws.
2. Remove the accelerator control splash shield.







2. Remove the speed control actuator cable.
- Lift the speed control actuator upward to remove.







3. Remove the speed control actuator cable to accelerator cable bracket bolt.







4. Push in locking arm on speed control actuator cable cap. Rotate cap counter clockwise and remove the speed control actuator cable cap from speed control servo.







5. Disconnect the speed control core wire end from speed control servo pulley.
1. Depress the spring retainer.
2. Slide core wire end out of the speed control servo pulley.







6. Disconnect the speed control servo electrical connector.







7. Remove the speed control servo and bracket.
1. Remove the two bolts.
2. Remove the speed control servo and bracket.







8. Remove the speed control servo bracket.
1. Remove the three screws.
2. Remove the speed control servo bracket.


INSTALLATION





















1. To install, reverse the removal procedure.