Bulbs

REMOVAL







1. Disconnect the battery ground cable.







2. Remove the center instrument panel finish panel.
^ Carefully pry to release the four clips.







3. If equipped, disconnect the 4WD rotary control switch electrical connector.







4. Remove the climate control head.
1. Remove the climate control head screws.
2. Pull out the climate control head.







5. Disconnect the climate control head.
1. Disconnect the electrical connectors.
2. Disconnect the vacuum line connector.







6. Remove the two illumination bulbs.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.