Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)

Temperature Sensor (Gauge): Service and Repair

REMOVAL
1. Partially drain the cooling system.
2. Remove the water temperature indicator sender unit.
a. Disconnect the electrical connector.
b. Remove the water temperature indicator sender unit.

INSTALLATION
1. Install the water temperature indicator sender unit.
a. Install the water temperature indicator sender unit.
b. Connect the electrical connector.
2. Fill the cooling system.