A/C Cycling Switch

REMOVAL







1. Disconnect the A/C cycling pressure switch electrical connector.







2. Remove the A/C cycling switch from the top of the suction accumulator/drier.

INSTALLATION
1. Lubricate the new O-ring seal.
^ Use Motorcraft YN-12b Refrigerant Oil F2AZ-19577-AC or equivalent meeting Ford specification WSH-M1C231-B.







2. Install the A/C cycling switch onto the top of the suction accumulator/drier.







3. Reconnect the A/C cycling pressure switch wiring connector.
4. Check for refrigerant leaks.