Four Wheel Air Suspension

REMOVAL
1. Remove the windshield reservoir.

WARNING: BEFORE REPAIRING ANY AIR SUSPENSION COMPONENTS, DISCONNECT THE POWER TO THE SYSTEM BY TURNING OFF THE SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA TO PREVENT VEHICLE DAMAGE OR PERSONAL INJURY.





2. Disconnect the air lines from the air compressor.
(1) Depress the red plastic retaining rings and hold firmly while pulling out on the air lines.
(2) Disconnect the air lines.





3. Disconnect the air compressor electrical connector.





4. Remove the air compressor bracket bolts and remove the air compressor and drier assembly.





INSTALLATION
1. To install, reverse the removal procedure.

NOTE: When reinstalling air lines into compressor drier a maximum of 3 mm (1/8 in) of visible white air line must be installed for correct installation.