Four Wheel Air Suspension

A microcontroller-based electronic module controls the air compressor motor (through a solid state relay), and all system solenoids. The module also provides power to front and rear height sensors. The module controls vehicle height adjustments by monitoring the two height sensors, vehicle speed, a steering sensor, acceleration input, the door ajar signal, transfer case signals, and the brake switch. The module also conducts all fail-safe and diagnostic strategies and contains self-test and communication software for testing of the vehicle and related components.

The control module is mounted in the passenger compartment inside the instrument panel, above the radio and temperature controls.

The air suspension system control module monitors and controls the system through a 32-pin two-way connector. The control module is keyed so that it cannot be plugged into an incorrect harness. There are two sides of the harness connection to the module. Each is uniquely colored and keyed to prevent reversing the connections.