Quick Test 2.0 - Setup

Connect New Generation Star (NGS) Tester to data link connector.

The following are procedures to run OBDII procedures.
Prepare the vehicle as follows:
- Transmission range selector lever in PARK.
- Engine to operating temperature.
- Apply parking brake.
- Block wheels.
- Turn off all electrical loads, including A/C and defroster. (If A/C is on, DTC P1460 will set.)





Prepare the NGS as follows:
- Key off.
- Verify that the proper PROGRAM card is inserted in the NGS.
- Connect J1962/16-way DCL cable adapter to the NGS.
- Connect NGS DCL cable adapter securely into the vehicle DCL connector.
- Connect the NGS power supply cable to the vehicle battery power supply through cigar lighter or at the battery with alligator clip adapter. Key on or start vehicle if necessary.
- The NGS is now ready to communicate with the PCM.