Camshaft Position Sensor: Service and Repair

REMOVAL






1. Disconnect the battery ground cable.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

2. Remove the upper intake manifold.






3. Remove the Camshaft Position (CMP) sensor.
1 Disconnect the CMP electrical connector.
2 Remove the screws.

4. Remove the CMP sensor

INSTALLATION

CAUTION: Insure that the CMP sensor is properly positioned.






1. Install the CMP sensor.
1 Position the CMP sensor.
2 Install the screws.

2. Connect the CMP electrical connector.
3. Install the upper intake manifold.






4. Connect the battery ground cable.