Climate Control Head

NOTE: The following procedure is for the manual climate control head. The Electronic Automatic Temperature Control (EATC) is similar.

REMOVAL




1. Disconnect the battery ground cable.




2. Remove the instrument panel finish panel.
1 Remove the two screws.
2 Remove the instrument panel finish panel.
- Disconnect electrical connectors.




3. Remove the four screws and remove the climate control head.




4. Disconnect the climate control head.
1 Disconnect the electrical connectors.
2 Disconnect the vacuum line connector.

INSTALLATION










1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.