Shift Solenoid 1 and 2

DESCRIPTION
Two ON/OFF shift solenoids provide gear selection of first through fourth gears by controlling the pressure to the three shift valves. One unit containing the two shift solenoids is located in the main control valve body. The shift solenoids are two-way normally open style.

SS-1 SYMPTOMS
Improper gear selection depending on failure mode and manual lever position.
Failed ON - first and fourth gear only.
Failed OFF - second and third gear only.

DTCs
P0750*, P0751**, P0781**, P0782**, P0783**, P1751, P1714*.

SS-2 SYMPTOMS
Improper gear selection depending on failure mode and manual lever position.
Failed ON - third and fourth gear only.
Failed OFF - first and second gear only.

DTCs
P0755*, P0756**, P0782**, P0783**, P1715**, P1756.

SS1 and SS2 SYMPTOMS
Both failed ON - fourth gear only.
Both failed OFF - second gear only.

DTCs
P0750*, P0751**, P0755*, P0756.

* Output circuit check, generated only by electrical conditions.
** May also be generated by some non-electrical transmission component condition.