Brake Light Switch: Service and Repair

REMOVAL







1. Disconnect the battery ground cable.







2. Disconnect the brake on/off (BOO) switch electrical connector.







3. Remove the BOO switch.
1. Remove the self locking pin.
2. Remove the brake master cylinder push rod spacer.
3. Disconnect the (A) (BOO) switch from the (B) brake master cylinder push rod.
4. Remove the brake master cylinder push rod bushing.
5. Remove the brake master cylinder push rod spacer.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.