Rear Door

REMOVAL
1. Raise the rear door window glass to the full up position.







2. Disconnect the battery ground cable.
3. Remove the rear door trim panel.







4. Remove the power window motor.

NOTE: Prior to motor removal, ensure the regulator arms are in a fixed position to prevent counterbalance spring unwind.

1. Remove the two nuts.
2. Disconnect the electrical connector.
3. Remove the power window motor.

INSTALLATION












1. To install, reverse the removal procedure.

- Cycle the door glass to ensure engagement.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.