Front Bucket Seats

REMOVAL






1. Remove the console panel.
1 Remove the two nuts.
2 Remove the two bolts.
3 Remove the console panel.






2. Remove the passenger seat safety belt buckle.
1 Use Safety Belt Bolt Bit T77L-2100-A to remove the bolt.
2 Remove the passenger seat safety belt buckle.






3. On power driver seats, remove the driver seat safety belt buckle.
1 Disconnect the safety belt warning indicator switch electrical connector.
2 Use Safety Belt Bolt Bit T77L-2100-A to remove the bolt.
3 Remove the driver seat safety belt buckle.






4. On manual driver seats, remove the driver side safety belt buckle.
1 Disconnect the safety belt warning indicator switch electrical connector.
2 Remove the driver seat safety belt buckle nut.
3 Remove the driver seat safety belt buckle.

INSTALLATION

To install, reverse the removal procedure. Check for proper operation.

NOTE: Make sure that safety belt webbing is not twisted prior to installation.