Water Pump: Service and Repair

REMOVAL
1. Drain the cooling system.
2. Remove the engine cooling fan and fan shroud.
3. Remove the drive belt.






4. Remove the water pump pulley.
a. Remove the water pump pulley bolts.
b. Remove the water pump pulley.






5. Remove the water pump bolts.






6. Remove the (A) water pump from the (B) cylinder block.
- Clean and inspect the mating surfaces.






INSTALLATION
1. Install the water pump.
a. Lubricate and install the O-ring seal.
- Use Ford Premium Cooling System Fluid E2FZ-19549-AA (in Canada, CXC-8-B) or equivalent meeting Ford specifications ESE-M97B4lA.
b. Position the (A) water pump on the (B) engine.
c. Loosely install the water pump bolts.






2. Tighten the water pump bolts in the sequence shown.





3. Position the (A) water pump pulley on the (B) water pump and loosely install the water pump pulley bolts.






4. Tighten the water pump pulley bolts in the sequence shown.
5. Install the drive belt.
6. Install the engine cooling fan and fan shroud.
7. Fill the cooling system.