F

Pinpoint Test F: Open RABS II Isolation Solenoid Circuit (DTC 2) (Part 1 Of 2):

Pinpoint Test F: Open RABS II Isolation Solenoid Circuit (DTC 2) (Part 2 Of 2):

DESCRIPTION

Code 2 is generated when the anti-lock electronic control module detects an open circuit in Circuit 599 (PK/LG). The code can also be generated by a failed isolation solenoid (open coil) internal to the RABS valve or a failed internal anti-lock electronic control module circuit.

POSSIBLE CONTRIBUTING BASE BRAKE COMPONENT/VEHICLE WIRING CONCERNS

- Terminal back-out in the anti-lock electronic control module harness connector at Pin 13
- Terminal back-out in the RABS valve harness connector at Pin 1
- Bulkhead connector (between engine compartment and instrument panel) terminal back-out or loose connection
- Anti-lock electronic control module or RABS valve connectors not fully mated with component
- Intermittent open in Circuit 599 (PK/LO)