Rear Antilock Brakes (RABS)

C2 CHECK ANTI-LOCK ELECTRONIC CONTROL MODULE GROUND

NOTE: When check resistance in the RABS System, always disconnect the battery to starter relay cable. Improper resistance may occur with the vehicle battery connected.

Anti-Lock ECM Ground:

- Measure the resistance between the anti-lock electronic control module C222-4, circuit 530 (LG/Y), and ground?

> Yes
Reconnect the battery ground cable. go to Pinpoint Test C3. C3

> No
Repair circuit 530 (LG/Y). Repeat System Pre-Check. Initial Inspection and Diagnostic Overview