Quick Test 2.0 - Setup

Connect New Generation Star (NGS) tester to data link connector.

The following are procedures to run OBDII procedures.
Prepare the vehicle as follows:
- Transmission range selector lever in PARK.
- Engine to operating temperature.
- Apply parking brake.
- Block wheels.
- Turn OFF all electrical loads, including A/C and defroster. (If A/C is ON, DTC P1460 will set.)





Prepare the NGS as follows:
- Key OFF.
- Verify that the proper PROGRAM card is inserted in the NGS.
- Connect J1962/16-way DCL cable adapter to the NGS.
- Connect NGS DCL cable adapter securely into the vehicle DCL connector.
- Connect the NGS power supply cable to the vehicle battery power supply through cigar lighter or at the battery with alligator clip adapter. Key ON or start vehicle if necessary.

The NGS is now ready to communicate with the PCM.