Crankshaft

End Play 0.10-0.20 mm (0.004-0.008 inch)
Connecting Rod Journal
Diameter 58.682-58.702 mm (2.3103-2.3111 inch)
Out of Round
Maximum (in 45°) 0.008 mm (0.0003 inch)
Total 0.015 mm (0.006 inch)
Surface,
Limit (RMS) 0.3 micrometers (11.8 micro inch)
Taper, Per 25 mm (1.0 inch) 0.008 mm (0.0003 inch)
Main Journal
Diameter 63.983-64.003 mm (2.5190-2.5198 inch)
Out of Round
Maximum (in 45°) 0.008 mm (0.0003 inch)
Total 0.015 mm (0.006 inch)
* Runout 0.05 mm (0.002 inch)
Surface,
Finish (RMS) 0.3 micrometers (11.8 micro inch)
Refinishing, Maximum 0.25 mm (0.010 inch)
Taper, Per 25 mm (1.0 inch) 0.008 mm (0.0003 inch)
Thrust Bearing (No. 3)
Journal Length 29.725-29.775 mm (1.703-1.722 inch)
Thrust Face Surface Finish (RMS)
Front 0.9 micrometers (0.354 micro inch)
Rear 0.6 micrometers (0.236 micro inch)
Runout, Limit 0.025 mm (0.001 inch)

* Runout of journals No.2 & 3 to journals No.1 & 4. Also runout of adjacent journals to each other.