Seat, Sport

REMOVAL
1. Disconnect battery ground cable.
2. Remove the front seat track to floor insulators from the front and rear of each front seat track.
3. Remove the three seat track bolts and nut from the front seat track.
4. If equipped, disconnect the seat control switch electrical connector.
5. Disconnect the power lumbar/bolster support switch electrical connector.
6. Remove the front sport seat.

INSTALLATION
To install, reverse the removal procedure.

Install the nut first to correctly position the front sport seat assembly to the floor.

Tighten the seat track bolts and nut to 39-50 Nm (28-37 Lb-Ft).