Outside Rear View Mirror Control

MIRROR CONTROL
1. Key OFF.
2. Disconnect the outside rear view mirror control connector.







3. Measure the resistance between the terminals at the outside rear view mirror control under the conditions as indicated in the illustration.

NOTE: All resistances not specified in the chart for a switch position should be greater than 10,000 ohms.

4. If the resistances are not as specified, replace the outside rear view mirror control. Otherwise, return to the Pinpoint Tests. Pinpoint Tests
5. If the power outside rear view mirror does not operate as specified, replace the power outside rear view mirror in question. Otherwise, return to the Pinpoint Tests. Pinpoint Tests