D6 Check For Shorts In Module Harness Connector

D6 CHECK FOR SHORTS IN THE ANTI-LOCK ELECTRONIC CONTROL MODULE HARNESS CONNECTOR

- With the same set up as in Pinpoint Test D5, observe the yellow REAR ABS light.

Is the REAR ABS light on?

> Yes
Check for a short to ground in circuit 603 (DG). Reconnect the anti-lock electronic control module. Repeat the System Precheck.

> No
Leave the anti-lock electronic control module disconnected. Go to Pinpoint Test D7. [1][2]D7 - Check Circuit 571 (BK/O) Continuity