T7 Short to Ground Check, Circuit 886 (O/BK)

T7 SHORT TO GROUND CHECK, CIRCUIT 886 (O/BK) BETWEEN THE ANTI-LOCK ELECTRONIC CONTROL MODULE AND G-SWITCH HARNESS CONNECTOR

- Measure the resistance between Pin 30 and Pin 1 or 14 on the breakout box.

Is the resistance greater than 5 ohms?

> Yes
Go to Pinpoint Test T8. T8 Continuity Check, Circuit 887 (Y)

> No
Repair the short to ground in Circuit 886 (O/BK) between the ABS control module and acceleration G-switch. Go to Pinpoint Test T11. T11 Check For DTC Repeatability