T9 Short to Ground Check, Circuit 887 (Y)

T9 SHORT TO GROUND CHECK, CIRCUIT 887 (Y) BETWEEN THE ANTI-LOCK ELECTRONIC CONTROL MODULE (ECM) AND G-SWITCH HARNESS CONNECTOR

- Measure the resistance between Pin 31 and Pin 1 or 14 on the breakout box.

Is the resistance greater than 5 ohms?

> Yes
Go to Pinpoint Test T11. T11 Check For DTC Repeatability

> No
Repair the short to ground in Circuit 887 (Y) between the ABS ECM and G-switch. Go to Pinpoint Test T11. T11 Check For DTC Repeatability