G5

G5 POWER BRAKE BOOSTER PUSH ROD CHECK

- Support the brake master cylinder and remove the brake master cylinder mounting nuts.

- Position the brake master cylinder out of the way.

- With a shop fabricated gauge, check the power brake booster push rod alignment.

- The exposed end of the power brake booster push rod should be withing 24.89-25.27 mm (0.980-0.995 inch) of the brake master cylinder mounting surface on the power brake booster.

Does the power brake booster push rod require adjustment?

> Yes
Adjust as necessary.

> No
Go to Pinpoint Test G6. G6