Upshifts/Downshifts

NOTE: Upshifts and downshifts will be firm during this procedure. Pressure gauges may be removed. These tests should be performed on the road. If performed on the hoist, shift feel during engagement may not be possible.

LED will turn green when solenoids are activated and turn off when deactivated. Refer to the appropriate overlay for the proper status shift sequence of the shift solenoids during upshifts and downshifts.

1. Move transmission range selector lever into 3 and accelerate to 24 km/h (15 mph). By moving transmission range selector lever, shift to second gear.
- Did vehicle upshift to second gear?
- Did appropriate shift solenoids activate/deactivate?

2. Accelerate to 40 km/h (25 mph) and select third gear by turning GEAR SELECT dial to 3.
- Did vehicle upshift to third gear?
- Did appropriate shift solenoids activate/deactivate?

3. Accelerate to 56-72 km/h (35/45 mph) and select fourth gear by turning GEAR SELECT dial to 3.
- Did vehicle upshift to fourth gear?
- Did appropriate shift solenoids activate/deactivate?

4. Reverse the order to downshift.
- Did vehicle downshift from fourth to third, third to second, and second to first?