Service Notes

Unless otherwise noted, the disassembly and assembly illustrations are typical of all seats. If some of the steps do not apply to the particular vehicle being serviced, proceed to the next step and review the appropriate illustration.

Seat trim replacement requires removal and installation of seat components such as seat support bolt insulators, tracks and floor supports, and seat belts.

NOTE: Repairs to seat cushions or seat backs are performed out of the vehicle and are usually limited to replacement of torn or burned seat covers. In a few instances, the pads may be damaged and require replacement.

When installing new seats or cushions and covers, refer to the applicable illustration for the location of listing wires, hog rings, anti-squeak pads, and seat pad stack-up.