Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1997 >> Ranger 2WD V6-3.0L VIN U >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Cruise Control Switch: Testing and Inspection

Speed Control Actuator Switch Assembly
To test speed control actuator switch, perform the following voltage and resistance measurements.





Voltage Measurements
Remove connector from speed control servo. Connect the negative lead of voltmeter to Pin 10 (Circuit 676 [PK/O]) of connector. Measure the DC or AC voltage of the following circuits with positive lead of meter.

Resistance Measurements:





Resistance Measurements
Remove connector at speed control servo. Connect an ohmmeter between the designated circuits with ignition switch OFF.
pro multis · About Operation CHARM