Retrieve/Clear Continuous DTCs

1. Perform New Generation STAR Tester Hookup and Vehicle Selection.
2. Rotate dial to menu item Diagnostic Data Link and press trigger.

NOTE: The ignition switch must be in RUN position or test will fail.

3. Select module to test by rotating dial to highlight module and press trigger.
4. Menu item Diagnostic Test Modes is highlighted. Press trigger.
5. Rotate dial to menu item Retrieve/Clear Continuous DTC, press trigger, then press start (Button 3).
6. Clear individual DTC from selected module, highlight DTC by rotating dial then press Button 8.
7. Clear all DTCs from selected module, press Button 7.