Cylinder Head Assembly

DIMENSIONS
Gasket Surface Flatness: 0.08 mm (0.003 in.) over 152.0 mm (6.00 in.)





TORQUE SPECIFICATIONS
Tighten the Cylinder Head Bolt in three steps in the sequence shown:
Step 1: Tighten to 45-55 Nm (33-41 ft. lbs.)
Step 2: Back off all bolts a minimum of one full turn (360°)
Step 2: Retighten to 85-99 Nm (63-73 ft. lbs.)

NOTE: Lightly oil all bolt and threads before installation. Always use new bolts when installing a cylinder head.