Manufacturer Code Charts: 4: 4.3

4.3 CHECK FOR CONTINUITY ALONG THE HARNESS CIRCUIT 535 (LB/R)

- Set multimeter on the 200 ohm scale.

- Measure the resistance between anti-lock electronic control module harness connector Pin 6 and RABS valve harness connector Pin 2.

Is the resistance less than 10 ohms?

> Yes
Circuit is not open. Go to Pinpoint Test 4.4.4.4

> No
Find and repair the open circuit along circuit 535 (LB/R). Go to Pinpoint Test 4.10 4.10