Manufacturer Code Charts: 9: 9.1

9.1 VERIFY THE INTEGRITY OF THE ANTI-LOCK ELECTRONIC CONTROL MODULE CONNECTION

- Key "OFF."

- Disconnect the battery ground cable.

- Remove the anti-lock electronic control module connector.

- Pull gently on Circuit 519 (LG/BK) just behind Pin 10 on the harness connector.

- Pull gently on Circuit 523 (R/PK) just behind Pin 3 on the harness connector.

Is the terminal fully engaged?

> Yes
Leave the anti-lock electronic control module connector disconnected. Go to Pinpoint Test 9.2. 9.2

> No
Repair terminal or connector as needed. Go to Pinpoint Test 9.6. 9.6