Front Bucket Seat

DISASSEMBLY
1. Remove the bolts mounting front seat back to front seat back cover. Separate the front seat back from the front seat back cover and lift the seat back out of the vehicle.
2. Unhook the hog rings and/or plastic retainers and/or hook and loop retainers attaching the front seat back cover to the front seat back or cushion spring assembly and remove the front seat back cover.
3. Remove plastic retainers and front seat back trim panel, if so equipped.
4. Transfer the listing wires to the new front seat back cover.

ASSEMBLY
1. Position front seat back cover and front seat cushion pad and fasten to front seat cushion frame and spring with hog rings and J-retainers and/or hook and loop retainers.
2. Install front seat back trim panel, if equipped.
3. Install the front seat back to the front seat back cover.
4. Install front seat back latch lower cover.
5. Install front seat center armrest, if equipped.
6. Connect front seat back pad adjusting hose, if equipped.
7. Install front seat tracks support on front seat cushion frame and spring. Tighten attaching bolts/nuts to specifications.
8. Install front seat and seat support bolt insulator in vehicle. Tighten mounting bolts/nuts to specifications.
9. Check front seat tracks, front seat back frame and front seat back pad adjuster, if equipped, for proper operation.