Manufacturer Code Charts: 3: 3.2

3.2 VERIFY THE INTEGRITY OF THE RABS VALVE CONNECTION

- Remove the RABS valve connector.

- Inspect the RABS valve connector Pin 4.

- Gently pull on Pin 4 wire just behind the harness connector.

Are the connections clean and secure?

> Yes
Leave the RABS valve connector disconnected. Go to Pinpoint Test 3.3. 3.3

> No
Terminal(s) in RABS valve connector are loose, bent, deformed, corroded, or missing. Repair terminal or connector as needed. If not repairable, replace the RABS valve. Go to Pinpoint Test 3.6. 3.6

Terminal(s) in harness connector move back or come free of connector. Repair terminal or connector as needed. Go to Pinpoint Test 3.6. 3.6