Manufacturer Code Charts: 9: 9.2

9.2 VERIFY THE INTEGRITY OF THE SPEED SENSOR CONNECTION

- Remove the speed sensor connector.

- Inspect the speed sensor component connector for contamination or loose terminals.

- Gently pull on Circuit 519 (LG/BK) behind Pin B of the harness connector.

- Gently pull on Circuit 523 (R/PK) behind Pin A of the harness connector.

Are the terminals clean and secure?

> Yes
Leave the speed sensor connector disconnected. Go to Pinpoint Test 9.3. 9.3

> No
Repair the terminal or connectors as needed. If not repairable, replace the RABS speed sensor. Go to Pinpoint Test 9.6. 9.6