D5 - Check Power to the RABS Electronic Control Module

D5 CHECK FOR POWER TO THE ANTI-LOCK ELECTRONIC CONTROL MODULE

- Key "ON."

- Measure the voltage between the RABS harness connector Pin 1 (or Pin 9) and chassis ground.

- Are 9 volts or more present?

> Yes
Leave the anti-lock electronic control module disconnected. Go to Pinpoint Test D6. [1][2]D6 - Check For Shorts In RABS Control Module Harness Connector

> No
Repair circuit 601 (LB/PK) or associated fuse. Reconnect the anti-lock electronic control module. Repeat the System Precheck.